0

Your Cart is Empty

HKS Hipermax IV SP Suspension Mitsubishi Lancer Evolution X CZ4A 80250-AM001

MAX IV SP Code No. 80250-AM001
 
 



‰Ð_The above photo is an item for GRB.

The sport model to have a comfortable drive even in the winding road.



Application ‹ÛÛ Specification
Engine 4B11
Model Year 07/10 - 
Remarks Test vehicle: SST
‹ÛÛ
  FRONT REAR
Damping force adjustment 30 steps 30 steps
Base valve - -
Height adjustable lower bracket 䄆 䄆
Upper mount Spherical bearing Spherical bearing
Inverted/Normal type Inverted Normal
Damper/Spring layout Coilover Coilover
Spring rate change at factory Possible Possible
Damping force adjustment with wire - 䄆
Helper spring
(Spring rate N/mm)
䄆 ( 19.8 ) 䄆 ( 19.8 )



Ride Height mm
  Factory *2 Test data Adjustable range
High - Low *3
Drivable range
High - Low *4
FRONT Ride height *1 659 653 700 •__ 602 678 •__ 602
Against stock -41 -47 0 •__ -98 -22 •__ -98
REAR Ride height *1 652 639 679 •__‹ÛÛ588 679 •__‹ÛÛ617
Against stock -27 -40 0 •__ -91 0 •__ -62
*1. Height from road surface to fender arch.
*2. Height at factory is the data tested at HKS with the setting of Full Kit. (HKS' recommended setting.)
*3. Adjustable range (However, the lowest value may not be road legal.
Even within the adjustable range, car body, arm etc. may contact. In such case, it will be hard to drive.
Damper oil leakage or any other problems caused by low ride height setting from the factory setting will void the warranty of the product.)
*4. Drivable range that there is no contact of car body or arms etc. (However, change of tire/wheel size may cause a problem.)
Caution). Actual data depends on each vehicle.



Kit information
Spring of Full Kit
  F R
Spring rate N/mm(kgf/mm) 108 ( 11 ) 78 ( 8 )
Free height (mm) 170 200
Spring type Straight Straight
Recommended range to change spring rate N/mm(kgf/mm) å±10 ( 1 ) å±20 ( 2 )
Specification of damper
  F R
Damping force (Rebound/Damping)N* 2246 / 432 785 / 235
Default position of dial 15 15
Remaining damper stroke (Rebound/Damping)mm 41 / 58 68 / 67
* The value of the damping force is at piston speed of 0.1m/sec.
Setting data
  F R
Default Test Drivable limit
High *
Drivable limit
Low *
Default Test Drivable limit
High *
Drivable limit
Low *
Length of
case (mm)
301 301 319 274 436 424 449 411
Spring
Set length(mm)
202 208 202 230 267 267 255 274
Length to ride hight
adjuster (mm)
92 86 110 37 91 79 116 59
Lever ratio 1.04 1.10
* Refer to the above explanation *3 of ride height information for drivable high and low limitations.



Test vehicle information
  F R
Vehicle weight kg 919 662
Tire size (Air pressure) kPa 265 / 35 - 18 ( 220 ) 265 / 35 - 18 ( 220 )
Wheel size 10 JJ ÌÑ 18 off 25 10 JJ ÌÑ 18 off 25
Alignment
(Toe/Camber)
Test data 0 mm / -2å¡24' 0 mm / -2å¡30'
Standard value 0 å± 2 mm / -1å¡00' å± 30' in 3 å± 2 mm / -1å¡00' å± 30'
* Test data at HKS.



Parts List * It may be changed without prior notice.


Point
‹ÄÈThe product is evolved further based on Hipermax III Sports 09 Spec.
‹ÄÈFor further performance improvement, this product was developed with latest parts such as new shape needle, M-shaft, aluminum bracket, etc. based on Hipermax IV GT.
‹ÄÈThis product utilizes an adjustment dial that allows various driving conditions from street to circuit with high grip radial tires.
‹ÄÈTo maintain the stability in rear and traction performance, the spring rate is reduced, and the rate balance in front and rear are optimized.
‹ÄÈSettings for smooth turning and quick acceleration at a clip point are performed exclusively for Lance Evolution.
‹ÄÈCarefully choosing the stroke distribution and damping force setting achieves a high-level sporty driving performance. Stability and controllability in the critical area are also concerned.
‹ÄÈRecommended dial position for sporty driving is 15 in front and rear. Adjust the dial to 25-30 for street driving to provide relaxed feeling to a fellow passenger.
‹ÄÈWhen adjusting the rear damper, to avoid the damper from coming in contact with the arm resulting in damage, do not make the case length shorter than 411mm and the vehicle‰۪s rear height lower than -33mm.
‹ÄÈSince the front damper is close to the front tire and wheel, make sure the damper does not come into contact with any other parts of a vehicle when lowering the vehicle height. If the damper comes into contact with any other parts of a vehicle, slide the tire wheel outward using a wheel spacer or a similar tool.
  • It is our ambition at motorvention.com for all of our customers to be 100% satisfied with their purchase(s). If for any reason you are not satisfied we guarantee to refund any item you are not completely happy with.

    RETURNS

    If you are unsatisfied in any way, we are happy to refund items that are returned to us within 30 natural days of receiving your order.

    Item(s) must be returned at the customers expense in new, unused condition with original tags still attached in order to receive a refund. Limited edition items and items purchased on sale cannot be returned for a refund.

    We are unable to accept items for return if;

    Package has been opened and item has been used.

    Item is marked, scratched, bleached or damaged in anyway.

    Item is scented with aftershave, perfume, deodorant or smoke.

    Item have been washed.

    Once your return is received and inspected, we will send you an e-mail to notify you that we have received your returned item. We will also notify you of the approval or rejection of your refund.

    EXCHANGES

    We do not exchange item(s). If you purchased an item from motorvention.com and would like a different colour, size or style, a new order will need to be placed with the unwanted item(s) returned for a refund. See below for instructions on how items can be returned.

    CANCELLATIONS

    Cancellation of an order must be made during the first 60 minutes after purchase. Requests of cancellation of an order after 60 minutes from purchasing will not be accepted.

    Customer cancellation(s) will be reflected as a refund during the next 5 business days. Receiving a refund within this time period can also depend on the customers bank or payment providers processing time.

    To request a cancellation contact our customer services team at support@motorvention.com.

    PROCESS

    To exercise the right to return an item(s), you must contact our customer service team via e-mail at support@motorvention.com.

    To complete your return, we require a receipt or proof of purchase.

    After a refund has been accepted, confirmation will be sent to you by e-mail.

    The refund can take between 7 to 14 business days to be reflected on your account statement.

    If you haven’t received a refund yet, please first check your bank account again.

    Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted.

    If you’ve done all of this and you still have not received your refund yet, please contact support@motorvention.com.

×